High Pressure Hydro Jetting Machine|100 - 150 HP

High-Pressure Hydro Jetting Solution for Severe Scale Conditions In industries where uninterrupted operation is critical, equipment reliability defines overall plant performance. The PressureJet High-Pressure Hydro Jetting System is designed to address the most demanding scale removal requirements, operating within a powerful 1000 Bar (14,500 PSI) to 1400 Bar (20,300 PSI) pressure range. This system is purpose-built for applications where conventional cleaning methods fail to remove hard, compacted deposits. Its performance capability makes it a preferred choice for industries exposed to extreme fouling and high thermal stress. Engineered for Industries Facing Aggressive Scale Formation This hydro jetting system is widely used across Petrochemical, Oil & Gas, Distillery, and Sugar industries, where dense, stone-like scale can rapidly compromise heat transfer, restrict flow, and destabilize production lines. In such environments, cleaning efficiency directly impacts output consistency and operational safety. The system delivers controlled, high-energy water jets that target hardened deposits without damaging base metal surfaces. Heavy-Duty Cleaning for Oil & Petrochemical Industry In Petrochemical and Oil & Gas facilities, the system is deployed for intensive cleaning of heat exchanger in which crude oil is passing. At pressures up to 1400 Bar, the water jet produces concentrated impact capable of dislodging hardened scale from the internal surface of tubes. This level of cleaning restores internal surface condition, improves heat exchange efficiency, and helps maintain stable process operation. Critical Maintenance Solution for Distillery & Sugar Mills In Distilleries and Sugar Mills, evaporators and juice heaters operate under continuous thermal loading, especially during peak crushing and fermentation cycles. These conditions accelerate mineral scale formation, particularly inside evaporator calandria tubes, leading to reduced evaporation rates and increased steam consumption. High-pressure hydro jetting removes this hard scale efficiently, restoring clean heat transfer surfaces and enabling equipment to operate at optimal thermal efficiency throughout the production season. Restoring Performance and Protecting Production Continuity By removing hardened scale from critical process equipment, the system helps eliminate flow restrictions, reduce energy losses, and prevent forced shutdowns. Regular use of high-pressure hydro jetting ensures that heat exchangers, evaporators, and process tubing continue to perform at design capacity, even under the most demanding operating conditions. This makes the system an essential maintenance asset for plants where uptime, efficiency, and production stability are non-negotiable

High Pressure Hydro Jetting System as Production Insurance In continuous-process industries, the real cost of scale is not cleaning—it is lost production capacity. The PressureJet High Pressure Hydro Jetting System is designed as a process protection tool, not just a maintenance machine. Built to operate in the 1000 Bar (14,500 PSI) to 1400 Bar (20,300 PSI) range, this system delivers concentrated cleaning energy that prevents scale from ever becoming a performance-limiting factor. Rather than reacting to blocked equipment, this solution allows plants to control fouling before it controls output. Built to Remove What Shuts Plants Down In Pharma, Chemical and Solvent plants, scale behaves differently. High temperatures, aggressive chemistry, and continuous operation transform normal deposits into dense, stone-like layers that bond to internal surfaces. Once formed, these deposits cannot be removed with manual cleaning or chemical flushing. High pressure water jetting disrupts this bond at the root level. At pressures approaching 1400 Bar, the jet fractures hardened deposits at the interface, allowing scale to be removed cleanly—without attacking the parent metal or altering equipment geometry. From Maintenance Task to Process Stability Strategy Equipment such as condenser, heat exchangers, etc do not fail suddenly - they fail progressively. Scale first reduces heat transfer, then restricts flow, and finally forces operators to reduce throughput to stabilize the process. By the time cleaning becomes “urgent,” production losses are already locked in. This hydro jetting system changes that dynamic. By integrating high-pressure scale removal into planned maintenance cycles, plants maintain consistent thermal performance and flow capacity throughout the operating year. Precision Impact with Responsible Water Use Unlike high-flow flushing systems, this machine uses a low-to-medium flow profile that concentrates energy where it matters—on the deposit itself. The result is: • Higher impact force on hardened scale • Lower water consumption • Minimal effluent generation • No chemical exposure or surface damage A Permanent Answer to Hard Scale Challenges Hard scale does not have to be a recurring crisis. With the right pressure capability integrated into your maintenance strategy, it becomes a managed variable rather than a recurring threat. For plants that prioritize reliability, output consistency, and long-term equipment health, the PressureJet High Pressure Hydro Jetting System is not an expense—it is an investment in uninterrupted production.

High-Pressure Hydro Jetting Machine for Critical Process Equipment Cleaning The PressureJet High-Pressure Hydro Jetting System is engineered to tackle severe scale and fouling challenges in ETP Plants and Distillery operations, where process efficiency cannot be compromised. Operating within a powerful 500 Bar (7,250 PSI) to 1,000 Bar (14,500 PSI) pressure range and supported by a wide flow capacity from 30 to 110 LPM, this system delivers the flexibility required to address both precision cleaning and high-volume flushing applications. It is purpose-built to remove medium to hard scale that restricts flow, reduces heat transfer, and threatens production continuity. Specialized in Various Applications Hydro jetting system plays a vital role in maintaining performance across key process equipment, including: • Condenser Tube Cleaning Removes scale and sludge buildup to restore cooling efficiency and stabilize process temperatures. • Calandria Tube Cleaning Eliminates hard mineral scale from evaporator calandria, recovering full heat transfer efficiency. • Distillation Column Cleaning Clears internal fouling that restricts vapor-liquid contact and limits column throughput. • Heat Exchanger Tube Cleaning Restores design flow and thermal performance by removing baked-on deposits and residues. In distilleries, especially during peak fermentation and production cycles, rapid scale formation can quickly become a production bottleneck. In ETP plants, fouling directly impacts treatment efficiency and compliance. Dual Lance System for Maximum Productivity The optional Dual Lance System enables simultaneous cleaning of two tubes or passes, effectively doubling cleaning output without increasing manpower or shutdown duration. This feature is particularly valuable during tight maintenance windows, allowing facilities to complete cleaning operations in significantly less time. By reducing overall cleaning hours, the Dual Lance system helps plants return to full operational capacity faster while maintaining consistent cleaning quality. Built for Demanding Industrial Duty Designed for continuous operation in harsh environments, PressureJet systems are trusted by operators who demand performance consistency, mechanical reliability, and long service life. This machine is not just a cleaning solution—it is a strategic asset for facilities where uptime, efficiency, and production stability are non-negotiable.